Module A20
ISO
Model A20 was designed for complexes with up to a high number of elements but, of course, it is can also be used as a single modular container. The structure is quite thick and particularly well finished. This does not greatly affect the price, which remains highly competitive.
— monoblock A20 ISO
Features
The outside walls are 50 mm thick sandwich panels, and they are available either micro profiled or with a smooth finish. The colour of the wall panels is RAL 7035 White/Grey but, upon request, coloured panels are also available.
The frame is 20/10 mm thick and is available in any colour in the RAL range. Maximum customization is on offer.
Model A20 can be used for representative offices, changing rooms for industries or sports facilities and for toilets for a high number of users.
Dimensions | External | |
---|---|---|
Lenght ( roof profile ) | mm. 3.200, ….12.200 | |
Width ( roof profile ) | mm. 2.438 | |
Height | mm. 2.500 > 2.600 > 2.800 > 3.000 |
Dimensions | Internal | |
---|---|---|
Length (roof profile) | mm. 3.000,… 12.000 | |
Width ( roof profile ) | mm. 2.238 | |
Height | mm. 2.200 > 2.300 > 2.500 > 2.700 |
- Galvanized steel frame base profile thick 2,0 mm
- Galvanized steel structural columns (corner posts) thick 2,0 mm
- The walls are realized with insulated sandwich panels thick 50 mm, made of galvanized and pre-painted micro-fretted sheets, white / gray RAL 9002 on both sides
- Type 1: roof panels thick 40+40 mm with interposed polyurethane foam between two micro-corrugated galvanized metal sheets, colour RAL 9002 white / grey
- Type 2: external roof made of a corrugated galvanized metal sheets. Smooth short side sloops facilitate the drainage of the rain water and guarantee a higher thermal and acoustic insulation. The ceiling is flat and made of polyurethane sandwich panels thk 50 mm between two micro-corrugated galvanized metal sheets, colour RAL 9002 white / grey
- Lifting plates
- Optional: forklifts for lifting and handling of the unit
- The flooring's insulation is made of a corrugated plate with rockwool infills
- The roof profile and gutters are aligned . Internal PVC downpipes Ø 40 mm for Type 2
- Structure is assembled and welded or wrapped and bolted
- Colour of the structure is RAL 9002. Upon request, a different colour can be chosen with no extra cost in case of more than 7 units.
- Electrical main board with circuit breaker and adequate differential thermal magnetic switch
- 1 external junction box
- Internal neon ceiling lights 2x36W with switch, according to the customer's needs
- Bivalent sockets 10/16A IP44 , according to the customer's needs
- Floor made of flame retardant chipboard plywood panels thk 18 mm
- Floor is covered with a linoleum sheet, fixed with a special mastic glue
- The flooring's insulation is made of a corrugated plate with rockwool infills