Series C30 BE60 | GB Group Container

Module C30
BE60

Even more robust and sophisticated variant than the C30 ISO, the C30 BE60 modular unit is also our top of the range. The modular unit C30 BE60 is characterized by panels with a thickness of 60 mm, the electrical system embedded in the panel and a smooth internal finish.

— module C30 BE60

Features

Thanks to the ISO dimensions and the corner blocks in cast steel, the C30 BE60 module adapts to any architectural design up to three overlapping floors. Customization is always maximum.

It is possible to transport the C30 BE60 modular units assembled or disassembled, packed and stacked in packs of 4 or 5 units (our flat-pack system allows you to significantly reduce transport costs).

Dimensions	External
Length (roof profile)	mm. 3.055 ….9.055
Width (roof profile)	mm. 2.438
Height	mm. 2.690 > 2.890 > 3.090

Dimensions	Internal
Length (roof profile)	mm. 2.830,.…8.830
Width (roof profile)	mm. 2.218
Height	mm. 2.300 > 2.500 > 2.700

Galvanized steel frame base profile thk 3.0 mm
Galvanized steel structural columns (corner posts) thk 3.0 mm
Polyurethane wall panels thk 50mm between two micro-corrugated galvanized steel plates, colour RAL 9002 white /grey
Type 1: polyurethane roof panels thk 40+40 mm between two micro-corrugated galvanized steel plates, colour RAL 9002 white /grey
Type 2: External roof made of corrugated galvanized metal sheets . The smooth short side sloops facilitate the drainage of the rain water and guarantee a higher thermal and acoustic insulation . The roof is flat and made of polyurethane sandwich panels thk 50 mm, between two micro-corrugated galvanized steel plates, colour RAL 9002 white/grey
Lifting plates
Optional: fork lift for the lifting and handling of the unit
The flooring's insulation is made of a corrugated plate with rockwool infills
The roof profile and gutters are aligned . Type 2: Internal PVC downpipes Ø 40 mm
Structure is assembled and welded or wrapped and bolted
Colour of the structure is RAL 9002. Upon request, a different colour can be chosen with no extra cost in case of more than 7 units

Electrical installation is HIDDEN
Electrical main board with circuit breaker and adequate differential thermal magnetic switch
№ 1 external junction box
Internal neon ceiling lights 2x36W with switch, according to the customer's needs
Embedded bivalent sockets 10/16A IP44 , according to the customer's needs